Splitting force 11 t
Tractor version
Chainsaw length 44 cm
The 11 kW electric motor are equipped with soft starters. Therefore, starting the motor does not cause any intense power surge.
Tractor version
Chainsaw length 44 cm
The 11 kW electric motor are equipped with soft starters. Therefore, starting the motor does not cause any intense power surge.
You will find the technical data at the bottom of this page.
Description of the reference markings
S Floor type
110/185 Splitting force, 11 or 18,5 t
T Tractor operated
E Electric motor operated
C Chainsaw
440 Blade range in mm
Ask for more information
SAMI Autochopper brochure| Saw’s form of use | Chain saw |
| Saw’s blade size mm | Harvester 440 |
| Maximum blade range | 440 mm |
| Method of application | Tractor |
| Driving force | 30 hp |
| Operating voltage | 12 V |
| Transmission of the saw | Hydraulic |
| Minimum/maximum log length | 200-500 mm |
| Splitting force | 11 t |
| Cycle time | 4-8 s |
| Control system | Microprocessor |
| Mechanical adjustments | No |
| Automatic drive | Yes |
| Semi-automatic use with joystick | Yes |
| Manual use with joystick | Yes |
| Uninterrupted Nonstop drive | Yes |
| Log feeding at feed belt | Yes |
| Feed mat reverse | Yes |
| Automatic log ram and diameter measurement | Yes |
| Automatic blade disconnection | Yes |
| Automatic splitting wedge alignment at every saw cut | Yes |
| Automatic cut in half of logs less than 100 mm | Yes |
| Optimization of log ends, 3 alternatives | Yes |
| Telescopic fully hydraulic discharge conveyor | Option |
| Litter separator at the end of the discharge conveyor | Option |
| Sideways rotatable discharge conveyor | Option |
| Splitting wedge 2/4 | Standard |
| Splitting wedge 2/6 | Option |
| Splitting wedge 2/8 | Option |
| Splitting wedge 2/12 | Option |
| Hydraulic log jack / working and transport position | Option |
| Spotlights | Option |
| Hard metal chain | Option |
| Hydraulic sideways rotation of the discharge conveyor | Option |
| Oil cooler | Yes |
| Honeycomb-structured oil tank with opt. couplings, capacity | 115 L |
| Hydraulic spool valve for an accessory | Yes |
| Adapter for the sawdust extractor | Yes |
| Fitted tarpaulin | Yes |
| Information display and log: | Yes |
| • optimization choice • oil temperature • adjustment of the chain’s lubrication • operating hour meter • volume of cut logs m3 • maintenance notification (oil and filter change) • error code • interface for options • option for software additions |
|
| Measures in transport position WxDxH | 263x149x270 cm |
| Measures in working position WxDxH | 855x149x240 cm |
| Weight | 1400 kg |
